An essential part for do-it-yourselfers! This float valve assembly controls the water/nutrient solution level in your primary reservoir (controller). Comes with 1/2 in brass barbed fitting.
Both require 1/2" mounting hole
Both include Thread Sealant
All Plastic (short version) with 1/2" PVC barbed fitting.
length from mounting surface to end of float = 6-1/2"
over all length is 8-1/2"
Adjustable Float height.
With Brass Rod and 1/2” brass barbed fitting.
length from mounting surface to end of float = 11"
over all length is 12-3/4"